 |
 |
|||
40/50
|
|
|||
|
This 35 tonne machine is built similar to the 50/60 machine but is lighter to enhance flexibility for transportation while maintaining good production performances. The 40/50 is a very popular machine for contractors working up to 5m or 6m deep. |
|
Standard machine Engine power: 354kw (475 hp) at 2100rpm
|
Trenching
dimensions
Depth:
2.8m – 6m (with 1m optional extension) Width: 280mm |
Dimensions
(Transport
Position)
Width: 2.95m
Length: 14.15m
Height: 3.15m Weight: 35 tonne (approx) |
|
|
|
All dimensions are approximate and in meters. Overall length will vary with digging boom length. |
| Machine Features These are just a few of the standard & optional features available |
Standard |
Optional |
| Oscillating Tracks |
a |
|
| Side tilt correction in digging boom |
a |
|
| Slewable trenching unit |
a |
|
| Pressurized cabin with heating |
a |
|
| Vertical sliding mast for depth variation | a | |
| Noise reduction | a | |
| Hydraulic folding pipe reel platform |
a |
|
| 2 x independent pipe reel assembly |
a |
|
| Various boom extensions | r | |
| Laser control system | r | |
| Track extensions | r | |
| Cabin with air conditioning | r | |
| Front mounted pipe reel assembly | r | |
| Sand / gravel hopper | r |
| The information contained upon this Website is intended as a guide only. Mastenbroek Ltd reserves the right to alter design and specification of their products at anytime without notice or obligation. |
