 |
 |
|||
40/30
|
|
|||
|
The 40/30 is available in two basic executions. One as a heavy duty 53 tonne rock trencher to cope with hard rock conditions but relatively compact to suit local transport regulations. Secondly as a large type ladder trencher to work in soil or medium rock conditions. |
|
Standard machine Engine power: 328kw (440 hp) at 2000rpm
|
Trenching dimensionsDepth standard: 3.5m Width double chain: 0.63m - 1.10m |
Dimensions
(Transport
Position)
Width: 2.95m Length: 13.4m
Height: 2.95m Weight: 53 tonne (approx) |
|
|
|
All dimensions are approximate and in meters. Overall length will vary with digging boom length. |
| Machine Features These are just a few of the standard & optional features available |
Standard |
Optional |
| Chain drive by two direct coupled low speed high torque motors |
a |
|
| Auto creep system |
a |
|
| Hydraulically folding scraper (not with cable or pipe boxes) |
a |
|
| Slewable undercarriage |
a |
|
| Cabin with heating and air conditioning | a | |
| Noise reduction | a | |
|
|
||
| Forward discharge conveyor |
r |
|
| Syncro trench pipe installation system |
r |
|
| Cable / pipe installation system | r | |
| Machine laser control | r | |
| Dust suppression kit | r | |
| Rubber / nylon track pads | r |
| The information contained upon this Website is intended as a guide only. Mastenbroek Ltd reserves the right to alter design and specification of their products at anytime without notice or obligation. |
