Rock Trencher
30/25
|
The 30/25 is a heavy duty 42 tonne rock trencher to cope with hard rock conditions. The centrally positioned cabin ensures good visibility to all sides and so increases safety on the job site. |
|
Standard machine Engine power: 250kw (335 hp) at 2100rpm
|
Trenching
dimensions
Depth standard: 3.1m Width single chain: 0.3m - 0.5m Width double chain: 0.67m - 0.95m |
Dimensions
(Transport
Position)
Width: 2.95m Length: 13.7m
Height: 3.0m Weight: 42 tonne (approx) |
|
All dimensions are approximate and in meters. Overall length will vary with digging boom length. |
| Machine Features These are just a few of the standard & optional features available |
Standard |
Optional |
| Chain drive by two direct coupled low speed high torque motors |
a |
|
| Auto creep system |
a |
|
| Hydraulically folding scraper (not with cable or pipe boxes) |
a |
|
| Slewable undercarriage |
a |
|
| Cabin with heating and air conditioning | a | |
| Noise reduction | a | |
|
|
||
| Track lift or side tilt |
r |
|
| Forward discharge conveyor |
r |
|
| Syncro trench pipe installation system |
r |
|
| GPS grading / control systems | r | |
| Cable / pipe installation system | r | |
| Machine laser control | r | |
| Dust suppression kit | r | |
| Rubber / nylon track pads | r |
| The information contained upon this Website is intended as a guide only. Mastenbroek Ltd reserves the right to alter design and specification of their products at anytime without notice or obligation. |
