 |
 |
|||
20/18
|
|
|||
|
Available in two versions, a 32 tonne machine with boom offset and track lift, or a lighter 25 tonne fixed boom with side tilt, the 20/18 is a compact machine. Due to its power it is ideally suited to work in hard rock conditions where available space is limited. |
|
Standard machine Engine power: 201kw (270 hp) at 2100rpm
|
Trenching
dimensions
Depth standard: 3.0m Width single chain: 0.23m - 0.55m Width double chain: 0.45m - 0.75m |
Dimensions
(32
tonne machine Transport
Position)
Width: 2.5m Length: 11.1m
Height: 3.0m Weight: 32 tonne (approx) |
|
|
|
All dimensions for 32 tonne machine are approximate and in meters. Overall length will vary with digging boom length. |
| Machine Features These are just a few of the standard & optional features available |
Standard |
Optional |
| Slewable undercarriage |
a |
|
| Auto creep system |
a |
|
| Hydraulically folding scraper |
a |
|
| Cabin with heating and air conditioning |
a |
|
| Offset, variable adjustment left or right | r | |
| Track lift or side tilt |
r |
|
| Forward discharge conveyor |
r |
|
| Swing conveyor |
r |
|
| Cable / pipe installation system | r | |
| Machine laser control | r | |
| Dust suppression kit | r | |
| Rubber / nylon track pads | r |
| The information contained upon this Website is intended as a guide only. Mastenbroek Ltd reserves the right to alter design and specification of their products at anytime without notice or obligation. |
